single-brush washing systems | Iteco Washing Systems

Prevention of damage from winter frosts

Emptying the water system of the single brush machines to prevent damage caused by winter frosts.

With the arrival of the winter season, it is good practice to remember to empty the residual washing water from the single brush machines to prevent any damage caused by winter frosts.

System for draining the water system

For this reason, Iteco Washing Systems single bursh machines are equipped with a water emptying system: a series of valves positioned in the lower part of the machine that allow the complete drainage of the water tank, the water pump and of the connection hose to the spray nozzles of the single brush machine.

Cleaning the water filter

In addition to emptying operations, it is also recommended to clean the washing water filter between the water tank and the water pump to avoid obstructions and malfunctions due to the presence of impurities that can form in the water tank.

For information or advice on the maintenance of your Iteco Washing Systems branded washing systems:

21 September 2020 / By Iteco / Iteco news/ Bus • Buses • single brush • single-brush washing systems • truck • trucks/ 0 Comments

Easy Wash – Professional and cost-effective washing.

Single brush washing systems for a professional and cost effective washing of Trucks and Buses.

In the range of single brush washing systems, you can find also the models Easy Wash conceived and designed to offer a professional and cost effective washing for trucks and buses fleets of small dimensions.

Easy Wash 50E

Single brush washing system connected to power supply, AC 380 V 3 phases or 220 V mono phase

The system includes.

• Washing system easy to drive able to clean an Artic in less than 10 minutes with a maximum water consumption of 150 Litres of water. The single brush is able to clean the whole vehicles surface and with its tilting facility you can easily clean the sloping driver’s cabin

• Driving system with a wheeled trolley for manual moving, with two directional wheels and four pivoting wheels ensuring good grip and linear driving.

• 24V electric controls: totally protected and safe, tested complying with CE standards.

It can be used both indoor and outdoor, thanks to its reduced size of two square meters. The height can be customized on demand.

Quick installation in two ways: by direct connection. Cables and hoses are connected on the back of the machine without any driving system with cables and hoses free or with overhead rail installation through wall supports or poles.

Easy Wash 300

Single brush self-propelled washing system with hydraulic traction

Equipped with a hydraulic traction system, the single brush easywash does not require any connection to power or water supply.

An excellent solution for a washing service immediate and complete necessary for the transport companies or bus and coach operators with a limited number of vehicles.

The system consists of a single brush allowing the washing of the whole vehicles body and with its tilting facility of 20° you can easily clean the sloping driver’s cabin

The driving system includes double controls on both sides of the machine and allows the operator to drive it in both sense of directions.

Easy wash 300 is available in three versions:

• Model 300B (Petrol Engine

• Model 300D (Diesel Engine)

• Model 300E (Electric Motor with batteries)

4 September 2020 / By Iteco / Iteco news/ Bus • Buses • single brush • single-brush washing systems • truck wash • trucks • Washing Systems/ 0 Comments

TRUCK WASH washing system for commercial vehicles

Professional and economical mobile washing system for commercial vehicles and public transport

The single brush washing system truck wash is an independent self-propelled washing system conceived to assure complete external cleaning of heavy-duty vehicles such as trucks, trailers, tankers, RV, special vehicles and buses.

Surfaces total cleaning guaranteed

The washing system can clean the whole surface of the vehicle, thanks to its brush tilting device up to 20°

Washing time: maximum 10 minutes

Truck Wash is able to perform a complete wash of the vehicle in a maximum time of 10 minutes. This makes it ideal to operate intermediate washes between two transport services.

Three driving positions:

The single brush offers three types of driving: walk around, on board on a platform and sitting.

The washing system truck wash is available in the following versions
– D500 powered by a diesel engine (silenced motor available on demand)
– D500 HP powered by a diesel engine and equipped with a High-pressure lance.
– E500 powered by electric motor and batteries 24V

Head Office

Phone

Email

Tag: single-brush washing systems