Advice on the correct use and maintenance of batteries for Iteco Washing Systems autonomous single-brush machines with battery powered electric motor.
Ordinary maintenance operations are essential to maintain the high performance of your single-brush washing system over time.
Type of batteries to be used
To work, our electric single-brush machines need a battery system with the following characteristics:
1. Four 6V – 210Ah batteries
2. Two 12V – 186Ah quick charge pure lead batteries
3. A twelve cell battery of 2V-320Ah
Each configuration must be connected following the diagram shown in the images below
Four 6V – 210Ah batteries
Two 12V – 186Ah quick charge pure lead batteries
A twelve cell battery of 2V-320Ah
Attention: when connecting the batteries, be very careful not to reverse the polarity, to avoid damaging them.
Status and information on charging
Each electric floor machine has a battery charge status monitoring display.
If most of the lights are on, the batteries have a good state of charge;
If more than half of the lights are off, then you should recharge them as soon as possible.
If they are discharged, they must be recharged using a suitable battery charger by connecting it to the appropriate socket supplied with the device. For a longer lifespan of the batteries it is necessary to avoid partial charging and also to completely discharge the batteries.
For more information on the maintenance of your Iteco Washing Systems brand systems: